In tandem with their new processors and amplifiers, Anthem introduces the MCA 225, a powerful amplifier designed to complement various audio systems, offering exceptional performance even with other brands. Crafted in Canada, the MCA 225 sets itself apart with a range of features that promise an unparalleled listening experience.
Key Features:
Custom Craftsmanship: The MCA 225 is meticulously crafted, featuring custom low-noise high-power toroidal transformers, high-current bipolar output transistors, quality filter capacitors, advanced power supply regulators, oversized aluminum heatsinks, custom-designed dual binding posts, and patented auto-on/off circuitry. This level of craftsmanship ensures clean, clear, and audiophile-quality sound across the frequency spectrum.
Reduced Internal Cabling: The MCA GEN 2 series represents a significant redesign with a focus on minimizing internal cabling, providing a smoother circuit path for unobstructed audio performance. The inclusion of low-flux toroidal transformers and improved input transistors contributes to a greater sense of transparency, especially with dynamically complex material.
Improved Performance Benchmarks: Anthem has enhanced various performance benchmarks, including power bandwidth and slew rate. With an impressive signal-to-noise ratio of 120 dB, background noise is practically eliminated, promising a pure and natural sound reproduction that captures every detail.
ALM™ Technology: The MCA 225 incorporates Advanced Load Monitoring (ALM™) technology, monitoring internal temperature, current, and voltage for safe and uninterrupted long-term operation. ALM™ eliminates the need for internal fuses and engages only under extreme circumstances to protect the amplifier and speakers. It operates outside the signal path, ensuring it never interferes with the audio quality.
Dynamic Power: MCA amplifiers deliver remarkable dynamics, thanks to conservatively rated power supplies with high rail voltages. The low flux toroidal power transformers contribute to ultra-quiet performance by minimizing stray magnetic field radiation. This design ensures the delivery of pure, clean, and low-noise power necessary for reproducing the full dynamics of home theater and complex music recordings.
The Anthem MCA 225 GEN 2 Power Amplifier is a testament to Anthem's commitment to audio excellence, providing a powerful and precise amplification solution that enhances any audio system.
Enhanced Sound Quality:
Achieves lower Total Harmonic Distortion (THD), resulting in cleaner and purer audio with reduced noise.
Redesigned for Excellence:
The system has been completely overhauled, enhancing audio performance and overall reliability.
Increased Current Output:
Delivers higher current output, minimizing distortion and preserving sound quality.
Aesthetic Compatibility:
Designed to match the appearance of the AVM 70 and 90 A/V Preamplifier-Processor for a cohesive look.
Rackmount Option:
A rackmount kit is available for purchase separately.
Advanced Load Monitoring:
Improved system for load monitoring.
Enhanced Component Design:
Features 8 bipolar output devices per channel, reducing stress on individual components.
Energy Efficiency:
Standby power consumption of less than 2 watts, minimizing energy use.
| Category | Specification |
|---|
| Inputs | Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack) |
| Outputs | Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack) |
| Switches | - Front Panel: Power (On/Off)
- Rear Panel: 3 On/Off Modes (Trigger, Manual, Auto)
|
| THD AT 100W | - at 1 kHz: 0.0010%
- at 20 kHz: 0.015%
|
| IMD AT 100 W | - ITU-R (19 kHz + 20 kHz): 0.0005%
- SMPTE (60 Hz + 7 kHz): 0.002%
|
| Frequency Response, 20 HZ TO 20 KHZ | - Open Circuit: ± 0.1 dB
- 8Ω: ± 0.1 dB
- 4Ω: ± 0.1 dB
- 2Ω: ± 0.2 dB
|
| Other Specifications | - SNR, IEC-A, ref. 225 W: 120 dB
- Power Bandwidth, -3 dB at 200 W into 8 ohms: 90 kHz
- Slew Rate: 30 V/μs
- Damping Factor, 20 Hz to 1 kHz: 300
- Channel Separation, 100 Hz to 10 kHz: >65 dB
- Input Impedance (RCA / XLR): 10 kΩ / 15 kΩ
- Input Sensitivity, 225 W into 8 Ω: 1.5 Vrms
- Voltage Gain: (not provided)
|
| Dimensions | - Height: 6-5/8” (16.9 cm)
- Height with Rackmount Kit: 4U
- Width: 17-1/4" (43.9 cm)
- Depth: 18-1/8" (46 cm)
|
| Weight | - MCA 525 (Gen. 2): 61 lb (27.5 kg)
- MCA 325 (Gen. 2): 43 lb (19.5 kg)
- MCA 225 (Gen. 2): 40 lb (18 kg)
|
| Power Requirement | 120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz |
Delivery is made by common carrier next working day. Delivery is FREE for orders in-stock and over £100 or £9.99 for orders less than £100 or special delivery items.
Statutory Cancellation Right
You have the statutory right to cancel your order for any reason within 14 days beginning with the day you receive the item (please see clause 2 of our Conditions of Sale for the full instructions on cancellation and further information on your right of cancellation). We only accept cancellations via phone - 0115 975 8613, email - sales@superfi.co.uk or post - Superfi Returns, DB House, Rani Drive, Nottingham, NG5 1RF, United Kingdom.
Our Voluntary Returns Policy
As well as your statutory cancellation rights described above, you can return most products within 30 days of receipt of the products if the products are complete and are in an unused and undamaged condition. We only accept returns via phone - 0115 975 8613 or post - Superfi Returns, DB House, Rani Drive, Nottingham, NG5 1RF, United Kingdom.
Please note that this returns policy doesn't affect your statutory rights and therefore doesn't affect your right of cancellation as described above.
Please note that you must return each item in the same condition in which you received it. This means that new items must be returned new, unused and complete (including all accessories). Refunds for returned items that are not received in this condition, may be reduced.
