Skip to content

Art Pro Audio MACROMIXE4 4 Channel Personal Mixer

SKU 108795
Original price £90.00 - Original price £90.00
Original price
£90.00 - £90.00
Current price £90.00

  • The MacroMIX is a four-channel line mixer
  • Independent gain control.
  • Channels 1 and 2 have dual L/R phono inputs
  • Dual L/R phono outputs
  • line/headphone output jack on the front panel
  • Powering by 12V DC from the supplied adaptor

Problem:​ You need to add 3 mics to a mixer, which only has one available channel.

Solution:​ Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones, or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.


How to use:


  1. Connect the AC adapter cable to the 12V DC Input on the MacroMIX and plug the other end into a 120V AC power outlet.
  2. Connect your various signal sources to the appropriate Inputs on the MacroMIX with unbalanced shielded cables. Electric instruments or amplifier line outputs would go to the 1/4” input on channel 3 and/or 4. Stereo sources (tape deck, CD player, etc.) would be connected to the RCA Inputs on channels 1 and 2.
  3. Connect headphones to the Line/Headphone output. Alternatively, this jack can be connected to the stereo inputs of a powered monitor speaker or a headphone amplifier if added headphone loudness is required.
  4. Connect the MacroMIX’s stereo RCA Outputs to the L&R inputs on your tape deck, PC, or a PA mixer with stereo inputs.
  5. Adjust the Level controls for the desired mix.


  • Four input channels, Ch. 1 and 2 have dual L/R RCA inputs, with Ch. 3 you have a choice of one 1/4” or dual L/R RCA inputs and Ch 4 has a 1/4” unbalanced input.
  • Four Level controls, one for each channel
  • Dual L/R RCA Output connectors
  • 1/4” Line Out/Stereo Headphone output jack
  • Active preamplification and mixing circuitry
  • Input Impedance: 10K ohms unbalanced (all inputs)
  • 1/2/3 and 4 Input Gains: 32dB/26dB/26dB and 26dB
  • S/N Ratio: >90dB
  • THD: <0.008%
  • IMD (SMPTE): <0.008%
  • Power: 12V DC (Adapter included)
  • Dimensions: 5.625 x 3.75 x 1.75 inches (143mm x 92mm x 45mm)
  • Weight: 2 lbs (0.91kg)

Delivery is made by common carrier next working day. Delivery is FREE for orders in-stock and over £100 or £9.99 for orders less than £100 or special delivery items.

Statutory Cancellation Right

You have the statutory right to cancel your order for any reason within 14 days beginning with the day you receive the item (please see clause 2 of our Conditions of Sale for the full instructions on cancellation and further information on your right of cancellation). We only accept cancellations via phone - 0115 975 8613, email - or post - Superfi Returns, DB House, Rani Drive, Nottingham, NG5 1RF, United Kingdom.

Our Voluntary Returns Policy

As well as your statutory cancellation rights described above, you can return most products within 30 days of receipt of the products if the products are complete and are in an unused and undamaged condition. We only accept returns via phone - 0115 975 8613 or post - Superfi Returns, DB House, Rani Drive, Nottingham, NG5 1RF, United Kingdom.

Please note that this returns policy doesn't affect your statutory rights and therefore doesn't affect your right of cancellation as described above.

Please note that you must return each item in the same condition in which you received it. This means that new items must be returned new, unused and complete (including all accessories). Refunds for returned items that are not received in this condition, may be reduced.

Need Help?

Call us on 0115 975 8613

Contact Us