TASCAM IXZ MIC/INSTRUMENT PREAMP FOR IOS
-
.
-
Free & Next-Day Delivery Available
-
Hassle-Free Returns Within 30 Days
-
1 Year Warranty for Peaceful Ownership
Free & Next-Day Delivery Available
Hassle-Free Returns Within 30 Days
1 Year Warranty for Peaceful Ownership
The DR-44WLB revolutionises handheld recorders with its Wi-Fi feature. A free app for iOS or Android devices provides control, file transfer, and audio streaming to your smartphone or tablet computer. Start recording while on stage or from anywhere in the room. Set trim levels, check meters and control the transport. At the end of a performance, transfer recordings to your smartphone and instantly upload them to SoundCloud or Facebook, or even e-mail directly to fans.
The DR-44WLB has a pair of high-quality stereo condenser microphones built from high-performance components and arranged in XY pattern. These mics can handle high sound pressure levels without distortion. Two locking XLR inputs for external mics or sources are also available.
With four independent recording tracks, built-in mixer with reverb effect plus a bounce feature, the DR-44WLB offers the ability to create true multitrack recordings. Or record two tracks in different formats (WAV/MP3) or with different level settings.
TASCAM has once again revolutionized handheld recording! The DR-44WLB creates its own Wi-Fi network, and a free dedicated app can be used for remote operation without touching the unit. Since the Wi-Fi transmission range is about 20 metres, this feature can be used with the recorder in places that are normally out of reach. Not only does the app allow recording to be started and stopped, it can also be used to check and adjust input levels from an iOS or Android device. Everything related to recording can be done by Wi-Fi.
In addition, audio can be checked by Wi-Fi after recording. The audio quality can be checked through headphones connected to a smartphone. With operation capabilities and flexibility that exceeds infrared remotes – and reliability that approaches that of wired remotes – this handheld recorder allows freedom of placement that far surpasses that of previous models.
Starting with firmware version 2.0 it is also possible to connect via an existing router or access point. Advantages are that (1) you can use other web services like e-mail or sharing portals at the same time with your mobile device, and (2) Wi-Fi range thus control range might be larger, depending on the router capabilities. A direct connection, in contrast, is ideal when there is no Wi-Fi available or you don't have permission to use it.
Note: Checking audio via Wi-Fi is intended for use after recording.
Key features
Recording hardware
Recording functions
Playback functions
Editing functions
Other features
General | |
---|---|
Recording media | SD card (64 MB – 2 GB) SDHC card (4–32 GB) SDXC card (64–128 GB) |
Recording/playback formats | BWF: 44.1k/48k/96kHz, 16/24 bit WAV: 44.1k/48k/96kHz, 16/24 bit MP3: 44.1k/48kHz, 32/64/96/128/192/256/320 Kbit/s |
Number of channels | 4 channels |
Recorded files, 4-channel mode | Mono: Up to 4 files Stereo: Up to 2 files Stereo (1 file) + mono (up to 2 files) |
Recorded files, multitrack mode | Mono: Up to 4 files |
Analogue audio inputs and outputs | |
---|---|
EXT MIC/LINE IN jack (supporting phantom power supply) | Combo type XLR-3-31 (1: GND, 2: HOT, 3: COLD) 6.3-mm TRS standard jack (Tip: HOT, Ring: COLD, Sleeve: GND) |
When EXT IN switch set to MIC or MIC+PHANTOM | |
Input impedance | 2.2 kΩ or more |
Reference input level | –17.3 dBu ±2 dB |
Maximum input level | –1.3 dBu ±2 dB |
When EXT IN switch set to LINE | |
Input impedance | 2.2 kΩ or more |
Reference input level | +4 dBu |
Maximum input level | +20 dBu |
Phones/LINE OUT jack | 3.5-mm stereo mini jack |
Output impedance | 12 Ω |
Reference output level | –14 dBV (at 10 kΩ load) |
Maximum output level | +2 dBV (at 10 kΩ load) |
Maximum output power | 20 mW + 20 mW (at 32 Ω load) |
Built-in speaker | 0.3 W (mono) |
Other inputs/outputs | |
---|---|
USB port | Micro-B type |
Format | USB 2.0 HIGH SPEED mass storage class |
Audio performance | |
---|---|
Frequency response (EXT IN to LINE OUT) | 20 Hz – 20 kHz +1/−3 dB (44.1 kHz, JEITA) 20 Hz – 22 kHz +1/−3 dB (48 kHz, JEITA) 20 Hz – 40 kHz +1/−3 dB (96 kHz, JEITA) |
Distortion (EXT IN to LINE OUT) | 0.05% or less (44.1/48/96 kHz, JEITA) |
S/N ratio (EXT IN to LINE OUT) | 92 dB or higher (44.1/48/96 kHz, JEITA) |
Note: Measurements based on JEITA CP-2150 |
Requirements for connected computers | |
---|---|
Windows | Pentium 300 MHz or more 128 MB or more memory USB port (USB2.0 is recommended) |
Mac | Power PC, iMac, G3, or G4 with 266 MHz or higher 64MB or more memory USB port (USB2.0 is recommended) |
Recommended USB host controller | Intel chip set |
Wi-Fi standard | IEEE 802.11b/g/n (2.4 GHz only) |
Wireless communication mode | Simple access point (Limited AP) |
WiFi security | WPA2-PSK (WPS2.0 compatible) |
Power supply and other specifications | |
---|---|
Power supply | 4 AA batteries (alkaline or NiMH) USB bus power from a computer Dedicated AC adapter (Tascam PS-P520U; sold separately) |
Power consumption | 2.5W (maximum) |
Dimensions (W × H × D) | 79 mm × 162 mm × 43 mm |
Weight | 346 g (including batteries) 251 g (excluding batteries) |
Operating temperature | 0–40 °C |
Approximate battery operation time (continuous operation) | |
---|---|
Alkaline batteries (EVOLTA) | |
2ch WAV, 96 kHz, 24 bit | 13 hours (Recording with built-in microphone) |
2ch WAV, 44.1 kHz, 16 bit | 16 hours (Recording with built-in microphone) |
2ch MP3, 44.1 kHz, 128 Kbit/s | 14 hours (Recording with built-in microphone) |
4ch WAV, 96 kHz, 24 bit | 13 hours (Recording with built-in microphone + line input) |
4ch WAV, 44.1 kHz, 16 bit | 13.5 hours (Recording with built-in microphone + line input) |
4ch MP3, 44.1 kHz, 128 Kbit/s | 13.5 hours (Recording with built-in microphone + line input) |
2ch WAV, 44.1 kHz, 16 bit | 15.5 hours (Playback using headphones) |
2ch MP3, 44.1 kHz, 128 Kbit/s | 16 hours (Playback using headphones) |
NiMH batteries (eneloop) | |
2ch WAV, 96 kHz, 24 bit | 10.5 hours (Recording with built-in microphone) |
2ch WAV, 44.1 kHz, 16 bit | 12.5 hours (Recording with built-in microphone) |
2ch MP3, 44.1 kHz, 128 Kbit/s | 10 hours (Recording with built-in microphone) |
4ch WAV, 96 kHz, 24 bit | 10.5 hours (Recording with built-in microphone + line input) |
4ch WAV, 44.1 kHz, 16 bit | 11.5 hours (Recording with built-in microphone + line input) |
4ch MP3, 44.1 kHz, 128 Kbit/s | 11 hours (Recording with built-in microphone + line input) |
2ch WAV, 44.1 kHz, 16 bit | 12.5 hours (Playback using headphones) |
2ch MP3, 44.1 kHz, 128 Kbit/s | 12 hours (Playback using headphones) |
Delivery is made by common carrier next working day. Delivery is FREE for orders in-stock and over £100 or £9.99 for orders less than £100 or special delivery items.
Statutory Cancellation Right
You have the statutory right to cancel your order for any reason within 14 days beginning with the day you receive the item (please see clause 2 of our Conditions of Sale for the full instructions on cancellation and further information on your right of cancellation). We only accept cancellations via phone - 0115 975 8613, email - sales@superfi.co.uk or post - Superfi Returns, DB House, Rani Drive, Nottingham, NG5 1RF, United Kingdom.
Our Voluntary Returns Policy
As well as your statutory cancellation rights described above, you can return most products within 30 days of receipt of the products if the products are complete and are in an unused and undamaged condition. We only accept returns via phone - 0115 975 8613 or post - Superfi Returns, DB House, Rani Drive, Nottingham, NG5 1RF, United Kingdom.
Please note that this returns policy doesn't affect your statutory rights and therefore doesn't affect your right of cancellation as described above.
Please note that you must return each item in the same condition in which you received it. This means that new items must be returned new, unused and complete (including all accessories). Refunds for returned items that are not received in this condition, may be reduced.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}